Soco Model HVS-375FA-DR Type A Automatic Cold Saw
Year: 2005 Stock Number: 01116
Specifications (As per Manufacturer’s Brochure)
Cutting Capacity (Solids):
Round: 2.95” Diameter / Square: 2.55” x 2.55”
Cutting Capacity (Tubing):
Round: 4.33” Diameter / Square: 4.33” x 4.33” / Rectangle: 3.14” x 6.29”
Spindle Motor: 2 HP / Spindle RPM (2 Speed): 32/72 / Blade Size: 9.84” to 14.56” Dia
Dimensions: 94.4” L x 43.3” H x 68.8” L / Weight: 2,425 Lbs
Operating Condition: Excellent, Low Hours
Location: Solon, OH
Price:
$ 23,500.00
Click here for more information on this machine
or…
Call: 215-672-8112
Feeler Turret Lathe
Stock Number: 01115
Specifications (As per Manufacturer’s Brochure)
Variable Speed / 6 Station Bed Turret
Operating Condition: Good
Location: Warminster, PA
Price:
$ 3,500.00
Click here for more information on this machine
or…
Call: 215-672-8112
Bausch & Lomb (B&L) Model 33-12-11 Optical Comparator
Serial Number: DB 998 Stock Number: 01112
Specifications (As per Manufacturer’s Brochure)
10" Screen / 10X Lens / 115Volt 60 cycle 35 Watt / Micrometer Dials .250 per Rev
Stage Size: 5-1/4” x 10” attached to a slotted table / Travels (Approx): 1.5”X x .750”Y
Operating Condition: Unknown, also needs Bulb
Location: Tullytown, PA 19007
Price:
$ 600.00
Click here for more information on this machine
or…
Call: 215-672-8112
Brown & Sharpe Model No.5 Surface Grinder
Serial Number: 523-5-454 Stock Number: 01111
Specifications (As per Manufacturer’s Brochure)
Table Size: 8” x 24” / Electrics: 440 Volt 3 Phase
Equipped with (Must be verified by buyer)
Coolant System / Various Extra Grinding Wheels
Operating Condition: Very Good
Location: North East, MD 21901
Price:
Click here for more information on this machine
or…
Call: 215-672-8112
Medina Model B End Grinder
Serial Number: 169 Stock Number: 01110
Specifications (As per Manufacturer’s Brochure)
Table Size: 8” x 15” / Electrics: 220/440 Volts 3 Phase
Operating Condition: Good
Location: North East, MD 21901
Price:
Click here for more information on this machine
or…
Call: 215-672-8112
Monarch Model VMC 175B Vertical Machining Center
Year: 1996 (Installed 1997) Serial Number: 96612B Stock Number: 01108
Specifications (As per Manufacturer’s Brochure)
CNC Control: Fanuc 15M
Travels: X 76" Y 36" Z 44” / Table Load: 6,000 Lbs (Approx)
Spindle Speed Range: 30 to 10,000 RPM (Reconditioned 08/14/06)
Spindle Taper: CAT 50 / Maximum Tool Diameter and Length: 6”x13”
Automatic Tool Changer: 30 Tools / Ball Screws: 2” Diameter
Machine Weight: 35,000 Lbs Approx
Equipped with (Must be verified by buyer)
Rigid Tapping / Data Server / Renishaw Probe and TLI
High Precision Contouring Control “HPCC”
10,000 RPM, 30HP Gear Driven Spindle
Through the Spindle Coolant at 1000 PSI
Full Enclosure with Chip Conveyors
Operating Condition: Good
Location: Somerville, NJ 08876
Price:
$ 194,500.00
Click here for more information on this machine
or…
Call: 215-672-8112
Mori Seiki Model MV Junior Vertical Machining Center
Year: 1986 Serial Number: 992 Stock Number: 01107
Specifications (As per Manufacturer’s Brochure)
Yasnac MX2 Control
Table Dimensions: 35.4” x 16” / Maximum Load on Table: 660 Lbs
Maximum Table Travel (X Axis): 22” / (Y Axis): 16” / (Z Axis): 18”
Spindle Speed Range: 150 to 6,000 RPM
Spindle Taper: Cat 40 / Number Of Tools: 16
Floor Area: 88.6” x 85.8” / Machine Height: 97.64”
Operating Condition: Good
Location: Somerville, NJ 08876
Price:
$ 15,500.00
Click here for more information on this machine
or…
Call: 215-672-8112
Mitsubishi Model EX-8 CNC EDM (Electrode Type)
Year: 1997 Stock Number: 261809SB
Specifications (As per Manufacturer’s Brochure)
CNC Control Model: FP60E
Travels: X 11.8” Y 9.8” Z 9.8” C 360 Degrees
Max. Part Size: 29" x 19" x 6" / Max. Part Weight: 1,200 Lbs
Table Size: 20" x 14" / Internal Work Tank: 30" x 20" x 10"
Table to Pattern: 17.7" / Tank Capacity: 51 Gallons
Rapids (X/Y/Z): 1181 IPM / Maximum Electrode: 55 Lbs
Equipped with (Must be verified by buyer)
Tool Changer / Fike Fire Suppression System
Lots of 3R Tooling
Operating Condition: Good (Low Hours)
Location: Colorado
Price:
$ 52,500.00
Click here for more information on this machine
or…
Call: 215-672-8112
Polaris EDM (Electrode Type)
Year: 1996 Serial Number: 9032 Stock Number: 01106
Specifications (As per Manufacturer’s Brochure)
CNC Control: Hiedenhain Model EDMS 300H
Travels: X 20.550” Y 18.750” Z 14.750”
Tank Size: 40” x 59”
Tool Changer: System 3R with 6 Tool Positions
Power Supply: 300 Amp
Operating Condition: Like New
Location: Somerville, NJ 08876
Price:
$ 66,000.00
Click here for more information on this machine
or…
Call: 215-672-8112
Haas Model VF-1 Vertical Machining Center
Year: 1993 Serial Number: 1481R Stock Number: 01103
Specifications (As per Manufacturer’s Brochure)
Control: Haas / Table Size: 26” x 14”
X-Axis Travel: 20” / Y-Axis Travel: 16” / Z-Axis Travel: 20”
Rapid Traverse Speed (X/Y/Z): 470 IPM / Cutting Feedrate (X/Y/Z): 200 IPM
Spindle Nose to Table Surface: 4” to 24”
Spindle Taper: #40 / Magazine Tool Capacity: 20
Spindle Speed Range: 5,000 RPM / Spindle Drive Motor: 7.5 HP/5.0 HP
Floor Space Required (Approx.): 58” x 88” x 91” High
Machine Weight (Approx.): 6,000 Lbs
Equipped with (Must be verified by buyer)
Coolant Tank
Operating Condition: Spindle Drive Needs Repair
Location: Middletown, DE
Price:
$ 15,000.00 “As-Is” or $ 17,500.00 with Spindle Drive repaired
Click here for more information on this machine
or…
Call: 215-672-8112
Mitsubishi Model FX10 Wire EDM Machine
Year: 1996 Stock Number:286673SB
Specifications (As per Manufacturer’s Brochure)
CNC Control: Mitsubishi
Max Work Piece Dimension: 31.5” x 22.63” x 8.46”
Table Area: 24.8” x 20.87” / Max Work Piece Weight: 1,000 Lbs
X Travel: 13.78” / Y Travel: 9.84” / Z Travel: 8.66”
Equipped with (Must be verified by buyer)
Dielectric Fluid System / 4th Rail / Auto Wire Threader
Operating Condition: Good
Location: Colorado
Price:
$ 44,500.00
Click here for more information on this machine
or…
Call: 215-672-8112
Fadal Model 4020HT Vertical Machining Center
Year: 1991 Serial Number: 9105240 Stock Number: 01102
Specifications (As per Manufacturer’s Brochure)
CNC Control: System 88 with CRT Display
Table Size: 47.94” x 20” / Table Travel: 40” x 20”
Table Payload: 3,000 Lbs Approximate / Vertical Travel: 20”
Spindle Nose to Table: 4” to 32” / Spindle Speeds: 10,000 RPM
Motor: 22.5 HP Wired 230 Volts 3-Phase / Spindle Taper: Cat 40
Tool Changer: 21 Tools, Random Selection / Maximum Tool Diameter: 3”
Weight: 10,800 Lbs
Operating Condition: Good
This machine was overhauled in December of 2005
The X, Y, & Z Ball Screws, IO Board, Way Wipers, and Chiller Motor were replaced
The six belt system was upgraded to the new two belt system
The spindle was reconditioned
More than $18,500 spent for repairs
Location: Somerville, NJ 08876
Price:
$ 31,000.00
Click here for more information on this machine
or…
Call: 215-672-8112
Deckel Jig Bore/Grinder
Year: 1950’s Serial Number: 90122 Stock Number: 01101
Specifications (As per Manufacturer’s Brochure)
Spindle Speeds: 125 to 3,100 RPM / Spindle Stroke: 4”
Head Moves” 14” / X Travel: 15.6” / Y Travel: 10”
Electrics: 220 Volts 3 Phase
Equipped with (Must be verified by buyer)
60,000 RPM Grinding Head / 20,000 RPM Grinding Head
Optic Readout
Operating Condition: Good
Location: Somerville, NJ 08876
Price:
$ 11,750.00
Click here for more information on this machine
or…
Call: 215-672-8112
Hitachi Seiki Model DS250 Vertical Machining Center
Year: 2000 Serial Number: DS25075 Stock Number: 01100
Specifications (As per Manufacturer’s Brochure)
Control: Fanuc 21M / Tools: 21 / Max Spindle Speed: 12,000 RPM
Taper: 30 / Pallet Size: 12” x 20”
Equipped with (Must be verified by buyer)
Pallet System
Operating Condition: Good (6700 Hrs Run Time)
Location: Warminster, PAolorado
Price:
$ 41,500.00
Click here for more information on this machine
or…
Call: 215-672-8112
Emco Turn Model 342 CNC Turning Center
Year: 1997 Serial Number: R3R-J3-002 Stock Number: 01098
Specifications (As per Manufacturer’s Brochure)
Turning Diameter above Bed: 13.39” / Turning Diameter Over Cross Slide: 6.22”
Slide Way (Longitudinal) (Z-axis): 11.81” / Slide Way (Cross) (X-Axis): 11.81”
Chuck: 6” / Spindle Bore: 2.087” / Tube Bore: 2.559” / Spindle Speed: 0 to 4,000 RPM
Rapid Traverse Rate (X & Z axis): 39 & 29.5 Ft/Min / Turret: VDI 8 Station
Tailstock Spindle Diameter: 2.362” / Tailstock Spindle Stroke: 4.724”
Tailstock Taper: #4MT
Equipped with (Must be verified by buyer)
Fanuc OT Control / 16C Collet System / Some Tool holders
Operating Condition: Good
Location: Warminster, PA 18974
Price:
$ 16,500.00
Click here for more information on this machine
or…
Call: 215-672-8112
Emco Turn Model 342 CNC Turning Center
Year: 1997 Serial Number: R3R-I9-002 Stock Number: 01099
Specifications (As per Manufacturer’s Brochure)
Turning Diameter above Bed: 13.39” / Turning Diameter Over Cross Slide: 6.22”
Slide Way (Longitudinal) (Z-axis): 11.81” / Slide Way (Cross) (X-Axis): 11.81”
Chuck: 6” / Spindle Bore: 2.087” / Tube Bore: 2.559” / Spindle Speed: 0 to 4,000 RPM
Rapid Traverse Rate (X & Z axis): 39 & 29.5 Ft/Min / Turret: VDI 8 Station
Tailstock Spindle Diameter: 2.362” / Tailstock Spindle Stroke: 4.724”
Tailstock Taper: #4MT
Equipped with (Must be verified by buyer)
Fanuc OT Control / 16C Collet System / Some Tool holders
Operating Condition: Good
Location: Warminster, PA 18974
Price:
$ 16,500.00
Click here for more information on this machine
or…
Call: 215-672-8112
For Used Machine Tools
Contact...
Phone: 215-672-8112
Fax: 215-672-8119
northeast@comcast.net
Our Business Hours
Monday to Friday: 8am To 5pm EST
Saturday: 8am To 12pm EST
The Time Here Now Is...
Copyright © 2006 Northeast Precision Machinery Inc