Used Machine Tools

Boyer Schultz Model Challenger H612 Manual Surface Grinder
Stock Number: 01133

Specifications (As per Manufacturer?s Brochure)
Max. Grinding (Width x Length): 6? x 12?
Motor: 220 Volt 3-Phase

Equipped with (Must be verified by buyer)
6 x 12" Walker Ceramax Permanent Magnetic Chuck
3? Risor Block

Operating Condition: Good

Location: West Berlin, NJ 08009

Price: $ 1,875.00

Click here for more information on this machine
or?
Call: 215-672-8112

Kodak Model 3 Optical Comparator
Stock Number: 01132

Specifications (As per Manufacturer?s Brochure)
Screen Size: 14?
Operating Condition: Good
Location: West Berlin, NJ 08009
Price: $ 400.00

Click here for more information on this machine
or?
Call: 215-672-8112

Amada Model Pega 244 CNC Turret Punch Press
Year: 1997 Serial Number: AP440217 Stock Number: 01131

Specifications (As per Manufacturer?s Brochure)
CNC Control: Amadan-0-4P-C
Tonnage Capacity: 22 Tons / Maximum Sheet Thickness: 1/4"
Throat: 48" / Table Travel: 40" x 40"
Maximum Strokes Per Minute: 350 / Hits per Minute on 1" Moves: 200
Table Traverse Speed: 2,000 IPM / Turret: 24 Station Thick Bi-Directional
Motor: 5 HP / Electrics: 220 Volt 3-Phase
Floor Space: 92" Wide x 168" Long x 77" High
Machine Weight: 18,750 Lbs
Equipped with (Must be verified by buyer)
Thick Turret / Spring Loaded Stripper
Operating Condition: Good
Location: Cinnaminson, NJ 08077
Price: Price on Request

Click here for more information on this machine
or?
Call: 215-672-8112

Jones & Shipman Model 540 3-Axis Automatic Surface Grinder
Serial Number: BO 75023 Stock Number: 01129

Specifications (As per Manufacturer?s Brochure)
Max. Grinding (Width x Length): 6? x 18?
Motor: 220 Volt 3-Phase
Equipped with (Must be verified by buyer)
6 x 18" Permanent Magnetic Chuck
Coolant System
Operating Condition: Good
Location: West Berlin, NJ 08009
Price: $ 4,950.00

Click here for more information on this machine
or?
Call: 215-672-8112

Acer Model AGS 200 Manual Surface Grinder
Year: 1990 Serial Number: 901104 Stock Number: 01128

Specifications (As per Manufacturer?s Brochure)
Max. Grinding (Width x Length): 6? x 12?
Motor: 220 Volt 3-Phase
Equipped with (Must be verified by buyer)
6 x 12" Permanent Magnetic Chuck
Roller Ways
Operating Condition: Good
Location: West Berlin, NJ 08009
Price: $ 2,400.00

Click here for more information on this machine
or?
Call: 215-672-8112

Harig Model Super 612 Manual Surface Grinder
Stock Number: 01127

Specifications (As per Manufacturer?s Brochure)
Max. Grinding (Width x Length): 6? x 12?
Motor: 220 Volt 3-Phase
Equipped with (Must be verified by buyer)
6 x 12" Walker Ceramax Permanent Magnetic Chuck
Teflon Coated Ways
Operating Condition: Good
Location: West Berlin, NJ 08009
Price: $ 1,875.00

Click here for more information on this machine
or?
Call: 215-672-8112

Haas Model SL-20BB CNC Turning Center
Year: 1999 Stock Number: 286347SB

Specifications (As per Manufacturer?s Brochure)
SWING DIAMETER:
Over Front Apron: 23" / Over Cross Slide: 9.5"
CAPACITIES:
Chuck Size: 8.3" / Maximum Bar Capacity: 2.0"
Between Centers: 24.0" / Maximum Cutting Diameter: 10.3"
Maximum Cutting Length: 20.0" / Max Cutting Length w/ Std Workholding: 19.0"
SPINDLE
Maximum Speed: 4,000 RPM / Torque: 154 ft-lb@650 RPM
Max Power Rating: 20HP / Spindle Nose: A2-6
Spindle Bore: 3.00" / Draw Tube Bore: 2.06"
TRAVELS & FEEDRATES
X Axis: 8.45" / Z Axis: 20.00"
X-Axis Max Thrust: 3,400 Lbs / Z-Axis Max Thrust: 3,400 Lbs
Rapids on X: 1200 in/min
TURRET
Number of Tools: 10 / Tool Size (OD turning): 1.0"
Boring Bar Rear Clearance (from turret face): 4.37"
Index Time (one tool): 1 sec
ACCURACY
Positioning (+/-): 0.0002" / Repeatability (+/-): 0.0001"
MISCELLANEOUS
Coolant: 40 gallon / Power Requirement: 14 kVA
Volts/Phase: 200-250 VAC @ 50A, 3-phase 60 Hz
Air Requirement: 4 CFM @ 100 psi
Weight: 9,000 Lbs
Equipped with (Must be verified by buyer)
Remote Jog Handle / 3.5" Floppy Drive
Parts Catcher / Chip Auger
(5) O.D. Tool Holders / (10) I.D. Tool Holders
Operating Condition: Good
Location: Colorado
Price: $ 44,500.00

Click here for more information on this machine
or?
Call: 215-672-8112

Daewoo Model Lynx 200B CNC Turning Center
Year: 1997 Stock Number: 286997SB

Specifications (As per Manufacturer?s Brochure)
CNC Control: Mitsubishi 50l Meldas Control
Spindle Bore Diameter: 2.09" / Maximum Bar Capacity: 2"
Maximum Swing: 20.1" / Maximum Swing Over Saddle: 13.7"
Maximum Turning Diameter: 11" / Maximum Shaft Length: 12.7"
Chuck Size: 8" / Spindle Nose: Ats33 / Spindle Speeds: 6,000 RPM
Travel: X-Axis 6.3", Z-Axis 13" / Rapid Traverse: 790/945 IPM
Turret Configuration: 10 / Main Motor: 10HP
Equipped with (Must be verified by buyer)
Rhino Bar Hydrodynamic 12' Barfeed / S-20 Collet Chuck
Parts Catcher / Misc. O.D. & I.D. Tooling
Operating Condition: Good
Location: Colorado
Price: $ 26,500.00

Click here for more information on this machine
or?
Call: 215-672-8112

LNS QuickLoad Barfeed
Year: 1993 Serial Number: 18093 Stock Number: 01126

Specifications (As per Manufacturer?s Brochure)
Capacity: 8 to 76 mm
Operating Condition: Very Good
Location: Manchester, PA 17345
Price: $ 5,500.00

Click here for more information on this machine
or?
Call: 215-672-8112

Matsuura Model MC-600H-45 Horizontal CNC Machining Center
Year: 1987 Serial Number: 870406055 Stock Number: 01125

Specifications (As per Manufacturer?s Brochure)
CNC Control: Fanuc 11M / Type: A02B-0078-8021 / Serial Number: 7193499
Travels: X 23.62?, Y 17.71?, Z 18.90? / Table (Pallet) Size: 17.7? x 17.7?
Spindle Speed Range: 30 to 6,000 RPM / Motor: 15HP
Automatic Tool Changer: 100 Tools / Spindle Taper: BT 40
Max Table Payload: 1,100 Lbs / Table Top to Spindle Center: 2.95? to 20.67?
Spindle Diameter: 3.15?
Equipped with (Must be verified by buyer)
2- Pallets
Operating Condition: Good
Location: Philadelphia, PA 19136
Price: $ 35,000.00

Click here for more information on this machine
or?
Call: 215-672-8112

South Bend 17? x 60? Model CL-170E Turn-Nado Engine Lathe
Year: 1964 to ?68 (Estimated) Serial Number: 639GJ227 Stock Number: 01122

Specifications
Swing over Bed: 17? / Distance between Centers: 60? Plus
Hole through Spindle: 2.250? / Spindle Nose Mount: D1-8 Camlock
Electrics: 220 Volt 3-Phase / Weight: 5,500 Lbs (Estimated)
Equipped with (Must be verified by buyer)
Acu-Rite III 2-Axis Digital Readout System
Buck 10" 3-Jaw Chuck with Reversible Top Jaws
Work Light
Operating Condition: Good
Location: Bensalem, PA 19020
Price: $ 3,975.00

Click here for more information on this machine
or?
Call: 215-672-8112

Polamco 14? x 40? Model TUM-35 Engine Lathe
Stock Number: 01121

Specifications (As per Manufacturer?s Brochure)
Swing Over Bed: 14-1/2? / Distance between Centers: 36? / Spindle Motor: 5HP
Font familySwing over Cross Slide: 8-1/4? / Hole Thru Spindle: 1-1/2?
Speed Range: 28 to 2,500 RPM / Spindle Nose Mount: D1-4 Camlock
Inch/Metric Threading and Dials / Apron Spindle Control
Tailstock Taper: # 4MT / Wired: 220 Volts 3-Phase
Equipped with (Must be verified by buyer)
3 Jaw Chuck
4-Way Tool Post
Operating Condition: Good
Location: Tullytown, PA 19007
Price: Make Offer

Click here for more information on this machine
or?
Call: 215-672-8112

Monarch Model EE Turret Lathe
Serial Number: EE 44577 Stock Number: 01118

Specifications
Distance between Centers: 40?
Spindle Nose Mount: D1-3 / Spindle Speed Range: 0 to 4,000 RPM
Electrics: 220 Volt 3-Phase
Equipped with (Must be verified by buyer)
5C Collet Closer / 4 Jaw Chuck
Tool Post / Hydraulic Feed Turret
Coolant System / Splash Guard
Operating Condition: Good
Location: Plainfield, NJ 07062
Price: $ 2,500.00

Click here for more information on this machine
or?
Call: 215-672-8112

Bridgeport Vertical Milling Machine
Serial Number: 12/BR 59787 Stock Number: 01117

Specifications
1 HP / Step Belt / 42" Table
Equipped with (Must be verified by buyer)
Bridgeport Gear Box Type Power Feed
Operating Condition: Head needs repair
Location: Tullytown, PA 19007
Price: Make Offer

Click here for more information on this machine
or?
Call: 215-672-8112

South Bend Model Nordic 15 Engine Lathe
Serial Number: DN15-720531-G35 Stock Number: 01113

Specifications (As per Manufacturer?s Brochure)
FontSwing over Bed: 15-1/4? / Distance between Centers: 56?
sizeSwing over Cross Slide: 8-5/8? / Swing over Saddle Wings: 14-3/4?
Motor: 5 HP / Hole through Spindle: 2-1/32?
Spindle Speeds: 16 / Speed Range: 40 to 2,000 RPM
Spindle Nose: D1-6 Camlock / Spindle Taper: #6MT / Tailstock Taper: #4MT /
Cross Slide Travel: 9-1/4? / Top Slide Travel: 4-3/4?
Longitudinal Feed Range: .0025? to .140? IPR / Cross Feed Range: .00125? to .070? IPR
US Threads: 96 to 1-5/8 TPI / Metric Threads: .225 to 10 mm
Length of Bed: 93? / Carriage Travel: 54?
Tailstock Set Over: +- 3/8? / Tailstock Spindle Diameter: 2-1/8?
Dimensions: 99? Long
Operating Condition: Good
Location: Tullytown, PA 19007
Price: $ 2,950.00

Click here for more information on this machine
or?
Call: 215-672-8112

For Used Machine Tools
Contact...

Phone: 215-672-8112 Fax: 215-672-8119

northeast@comcast.net
Our Business Hours
Monday to Friday: 8am To 5pm EST
Saturday: 8am To 12pm EST
The Time Here Now Is...

Copyright ? 2006 Northeast Precision Machinery Inc