Victor Model 1600B Series Precision Engine Lathes
Reliable, Quiet, Inexpensive
Model 1660B 16”x60” Lathe illustrated above with Optional Newall DRO System
Features:
Specifications:
Model 1630B with Free Options Package $ 10,450.00
Model 1640B with Free Options Package $ 10,850.00
Model 1660B with Free Options Package $ 11,850.00
8" 3-Jaw Universal Chuck
10" 4-Jaw Independent Chuck
Face Plate
Steady Rest (Roller Type)
Follower Rest
Chuck Cover
4 Way tool Post
4 Position Carriage Stop
Halogen Work Light
1/8 HP 3-Phase Coolant Pump System
Full Length Splash Guard
One-Shot Lube System for Apron and Ways
Spindle supported at 3 points by Precision Bearings
Hardened and Ground Bed Ways
Hardened and Precision Ground Gears in Headstock
Inch/Metric Dials
Inch/Metric Threading without changing gears
Rigid One-Piece Cast Iron Base
Models Available: 1630B / 1640B / 1660B
Swing Over Bed: 16-1/8"
Distance Between Centers…
Model 1630B: 30"
Model 1640B: 40"
Model 1660B: 60"
Swing over Cross Slide: 10-1/4”
Swing in Gap: 23”
Length of Gap: 11-3/8”
Spindle Nose: D1-6 Camlock
Spindle Bore: 2-1/32"
Spindle Taper: #6 MT
Spindle Reducer Taper: #6 MT to #4 MT
Number of Spindle Speeds: 16
Spindle Speed Range: 33 to 2000 RPM
Spindle Nose: D1-6 Camlock
Number of Cross Feed Selections: 36
Cross Feed Range: .0028 to .038 IPR
Number of Longitudinal Feed Selections: 36
Longitudinal Feed Range: .0033 to .0455 IPR
Number of Inch Thread Selections: 36
Inch Thread Range: 4 to 56 TPI
Number of Metric Thread Selections: 22
Metric Thread Range: .5 to 7 mm
Tailstock Taper: #4 MT
Tailstock Quill Travel: 4-11/16”
Tailstock Quill Diameter: 2”
Motor: 7-1/2 HP 3-Phase
Crated Dimensions…
Model 1630B: 79” Wide x 37” Deep x 62” High
Model 1640B: 86” Wide x 37” Deep x 62” High
Model 1660B: 106” Wide x 37” Deep x 62” High
Shipping Weight…
Model 1630B: 3,300 lbs
Model 1640B: 3,600 lbs
Model 1660B: 4,110 lbs
Model 1640B 16”x40” Lathe illustrated above
8” 3-Jaw Universal Chuck [21032-5] $ 500.00 (No Charge with Free Options Package)
8” Zero-Set 3-Jaw Universal Chuck with Back Plate [21032-Z] $ 900.00
10” 3-Jaw Universal Chuck [21036-5] $ 600.00
10” Zero-Set 3-Jaw Universal Chuck with Back Plate [21036-Z] $ 1,200.00
12” 3-Jaw Universal Chuck [21040-5] $ 800.00
12” Zero-Set 3-Jaw Universal Chuck with Back Plate [21040-Z] $ 1,450.00
10” 4-Jaw Independent Chuck [21120-5] $ 500.00 (No Charge with Free Options Package)
12” 4-Jaw Independent Chuck [21122-5] $ 650.00
14” 4-Jaw Independent Chuck [21124] $ 950.00
15-3/4” Face Plate [31012] $ 370.00 (No Charge with Free Options Package)
#4 MT Live Center [21202] $ 170.00
Taper Turning Attachment (Installed) [31514] $ 1,420.00
5C Lever Type Collet Closer (Installed) [31521] $ 1,080.00
15 Piece 5C Collet Set [43052] $ 295.00
4-Way Tool Post [31524] $ 325.00 (No Charge with Free Options Package)
American Type Tool Post [31525] $ 95.00
Rear Tool Post [31526] $ 370.00
Micro Carriage Stop [31527] $ 165.00
4-Position Carriage Stop [31528] $ 155.00 (No Charge with Free Options Package)
Roller Type Steady Rest (8” Capacity) [31550] $ 580.00 (No Charge with Free Options Package)
Brass Tip Type Steady Rest (4” Capacity) [31535] $ 265.00
4-Position Cross Slide Stop [31530] $ 85.00
5/8" Capacity Drill Chuck with #4 MT Shank [31533] $ 160.00
¾” Capacity Quick Change Tool Post with 5 Quick Change Holders (#1,2,4,7,& 10) [32536-P] $ 520.00
1” Capacity Quick Change Tool Post with 5 Quick Change Holders (#1,2,4,7,& 10) [31536-P] $ 665.00
Newall Digital Readout System, Installed…
Model 1630B: $ 2,245.00
Model 1640B: $ 2,245.00
Model 1660B: $ 2,595.00
Prices, Specifications, and Availability are subject to change without notice
For Victor Model 1600B Series Precision Engine Lathes
Contact…
Phone: 215-509-6780
Fax: 215-509-6787
Our Business Hours
Monday to Friday: 8am To 5pm EST
Saturday: 8am To 12pm EST
The Time Here Now Is...
Copyright © 2009 Northeast Precision Machinery Inc
Used Lathes
Brands and Types typically sold from our Used Inventory:
